PLASTICS FORMULATION GUIDE

MK SERIES – Metallized foil for fine to broad detail on virtually all plastic materials and coatings, especially laminate films. Outstanding adhesion to PP and PE. High gloss, high heat resistance, overstampable, chemical resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ -450℉ Silicone Rubber Dies.

MC/MP SERIES
– Metallized foil for fine to medium detail on most plastics except PP and PE. High gloss, high heat resistance, overstampable, alcohol resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MPE SERIES – Ultra High Performance appliance grade metallized foil for medium to broad detail on most plastics except PP and PE. High gloss, high heat resistance, overstampable, excellent chemical resistance with good scratch and rub resistance. 240℉ –350℉ Metal Dies. 290℉ –500℉ Silicone Rubber Dies.

MPO SERIES – Metallized foil for fine to medium detail on most plastics including PVC, PP and PE. High gloss, high heat resistance, not overstampable, chemical resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MPX SERIES – Ultra High Performance cosmetic grade metallized foil for fine to medium detail on virtually all plastics including PP and PE. High gloss, high heat resistance, overstampable, excellent chemical, rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MR SERIES – Ultra High Performance cosmetic grade metallized foil for fine detail to broad coverage on virtually all plastics, except PP and PE. Hi gloss, high heat resistance, overstampable, excellent chemical, rub and scratch resistance. 225℉-325℉ metal dies. 275℉-450℉ Silicone Rubber Dies.

pigments2

MK SERIES – Metallized foil for fine to broad detail on virtually all plastic materials and coatings, especially laminate films. Outstanding adhesion to PP and PE. High gloss, high heat resistance, overstampable, chemical resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ -450℉ Silicone Rubber Dies.


MC/MP SERIES
– Metallized foil for fine to medium detail on most plastics except PP and PE. High gloss, high heat resistance, overstampable, alcohol resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MPE SERIES – Ultra High Performance appliance grade metallized foil for medium to broad detail on most plastics except PP and PE. High gloss, high heat resistance, overstampable, excellent chemical resistance with good scratch and rub resistance. 240℉ –350℉ Metal Dies. 290℉ –500℉ Silicone Rubber Dies.

MPO SERIES – Metallized foil for fine to medium detail on most plastics including PVC, PP and PE. High gloss, high heat resistance, not overstampable, chemical resistant with good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MPX SERIES – Ultra High Performance cosmetic grade metallized foil for fine to medium detail on virtually all plastics including PP and PE. High gloss, high heat resistance, overstampable, excellent chemical, rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

MR SERIES – Ultra High Performance cosmetic grade metallized foil for fine detail to broad coverage on virtually all plastics, except PP and PE. Hi gloss, high heat resistance, overstampable, excellent chemical, rub and scratch resistance. 225℉-325℉ metal dies. 275℉-450℉ Silicone Rubber Dies.

HU SERIES – Metallized holographic foil for fine to medium detail on most plastics and coatings including PP and PE. Super bright/colorful, high gloss, heat resistant, overstampable, good rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

AR SERIES – Special Gloss pigment formulation for fine to medium detail on most plastics. Excellent alcohol, rub and scratch resistance. 220℉ – 320℉ Metal Dies. 275℉ – 450℉ Silicone Rubber Dies. PG SERIES – High gloss pigment foil for fine to medium detail on most plastics and coatings except PP and PE. Good chemical, rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

PI SERIES – Exterior use grade high gloss pigment formulation for virtually all plastics including PP and PE. Built-in clear top coating provides excellent rub, chemical,water, UV light and heat resistance. Excels at producing deep,debossed stamped images with metal dies. 220℉ –320 ̊ F Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

PP SERIES – High gloss pigment foil for fine to medium detail on virtually all plastics including PP and PE. Good chemical, rub and scratch resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

PKX/PXP SERIES – Exterior use grade gloss pigment formulas with excellent rub, chemical,water and UV light resistance. Specifically formulated for use on polypropylene and polyethylene based materials. PKX (ultra outdoor durability) is available in white (490) and black (480) only. 240℉ –360℉ Metal Dies. 300℉ –500℉ Silicone Rubber Dies.

PS SERIES – Gloss pigment formulation for very fine to medium detail on most plastics except PP. Excellent rub and scratch resistance. Good alcohol and chemical resistance. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

PST SERIES – Special gloss pigment formulation designed for application onto rigid molded plastics used by the appliance, medical device and automotive industries. Excellent rub, scratch, tape and chemical resistance. 240℉ –360℉ Metal Dies. 300℉ –500℉ Silicone Rubber Dies.

PX SERIES – Exterior use/Cosmetic grade gloss pigment formula with excellent rub, scratch, chemical and water resistance. Designed for use on most plastics except PP and PE. 220℉ –320℉ Metal Dies. 275℉ –450℉ Silicone Rubber Dies.

PSC SERIES – Specially developed gloss pigment foil for fine to medium detail on both UV and thermal cured coatings as well as most rigid plastics except PP and PE. The built-in clear top coat provides excellent rub, scratch and chemical resistance. 240℉ –360℉ Metal Dies. 300℉ –500℉ Silicone Rubber Dies.