PM/BM Series Matte Pigment Hot Stamping Foil

PM/BM Series Matte Pigment Hot Stamping Foil

The PM/BM Series is a versatile matte pigment hot stamping foil designed for fine to medium designs on most plastic substrates, except polypropylene (PP) and polyethylene (PE). This formulation provides good opacity and is overstampable, making it suitable for a variety of decorative plastic applications. PM/BM Series offers a matte pigment finish for applications where a non-metallic, low-gloss appearance is desired. Its ability to produce fine to medium designs makes it suitable for decorative details, lettering and graphics on compatible plastic substrates.

Technical Specifications

Foil Type: Matte Pigment Hot Stamping Foil

Finish: Matte

Coverage: Fine to medium designs

Substrate Compatibility: Most plastics except polypropylene (PP) and polyethylene (PE)

Opacity: Good opacity

Additional Properties: Overstampable

DIE FACE TEMP. RANGE: METAL DIES 240ºF-340ºF, SILICONE RUBBER DIES 295ºF-470ºF.

Recommended Applications and Substrates

Important: PM/BM Series is not recommended for polypropylene (PP) or polyethylene (PE). Testing on the specific plastic substrate is recommended before production.

PM/BM Series Frequently Asked Questions

What is PM/BM Series hot stamping foil used for?

PM/BM Series is a versatile matte pigment foil designed for fine to medium designs on most plastic substrates, except polypropylene and polyethylene. It provides good opacity and is overstampable.

Can PM/BM Series be used on polypropylene and polyethylene?

No. PM/BM Series is intended for most plastics except polypropylene (PP) and polyethylene (PE). An alternative formulation should be selected for these substrates.

Is PM/BM Series overstampable?

Yes. PM/BM Series is overstampable, making it suitable for compatible applications requiring additional stamping operations.

What type of finish and coverage does PM/BM Series provide?

PM/BM Series provides a matte pigment finish with good opacity and is designed for fine to medium stamped designs.

What die-face temperatures are recommended for PM/BM Series?

The recommended die-face temperature ranges are 240ºF-340ºF for metal dies and 295ºF-470ºF for silicone rubber dies. Actual settings depend on the substrate, equipment and application.

Need Technical Assistance?

Contact Great Western Foils for assistance selecting the appropriate matte pigment foil for your plastic substrate and stamping application.