BC SERIES (Pigment)(G)(P) – Industrial grade easy release, matte pigment formula for medium to broad coverage on films, most coated and uncoated paper stocks. Good for date, lot and batch coding. METAL DIE FACE TEMP. RANGE: 220°F-280°F.
CG SERIES (Clear Gloss)(G)(P) – Easy release, special transparent gloss finish formula for enhancing underlying graphics. Medium to broad coverage on virtually all stocks and inks/coatings. METAL DIE FACE TEMP. RANGE: 210°F-270°F.
CM SERIES (Clear Matte)(G)(P) – Easy release, special transparent matte finish formula for enhancing underlying graphics. Medium to broad coverage on virtually all stocks, inks and coatings. METAL DIE FACE TEMP. RANGE: 210°F-270°F.
HF SERIES (Holographic)(G) – Easy release, heat resistant laser and diffraction pattern formula for stamping medium detail to broad coverage on a wide variety of smooth uncoated and coated paper stocks and most inks, coatings, print receptive laminates and rigid plastics. Can be used for edge gilding as well. METAL DIE FACE TEMP. RANGE: 220°F-270°F.
HT SERIES (Holographic)(G)(P) – Easy release, transparent holographic formula for stamping medium to large coverage onto coated or printed paper stocks. Stamps over most other foils. High gloss. For adding holographic effect over other images. METAL DIE FACE TEMP. RANGE: 230°F-280°F.
HU SERIES (Holographic)(G)(P) – Easy release, super-bright holographic formula featuring diffraction and colored patterns. Suitable for medium-fine detail through broad coverage on printed and coated sheets, laminates and most plastics. Also suitable for edge gilding. METAL DIE FACE TEMP. RANGE: 230°F-280°F, SILICONE RUBBER DIES 275°F-450°F.
MC SERIES (Metallic)(G)(P) – Easy release, high-gloss metallic formula designed for fine detail to broad coverage on smooth coated paper, paperboard, printed surfaces, and lacquered substrates. Alcohol resistant, very high gloss, good heat and abrasion resistance. Good results on problem inks and coatings. Works well on many rigid plastics. METAL DIE FACE TEMP. RANGE: 200°F-250°F.
MB SERIES (Metallic)(G)(P) – Very easy release formula for medium-fine detail through broad coverage on coated and uncoated paper and board. This problem solving, low-temperature formulation provides very high gloss and is suitable for embossing and difficult-to-stamp substrates, including ribbons, 100% cotton paper, kraft, parchment, dry paper stocks and most plastics. METAL DIE FACE TEMP. RANGE: 210°F-260°F, SILICONE RUBBER DIES 275°F-450°F.
MD SERIES (Metallic)(G)(P) – Easy release formula for medium-fine detail through broad coverage on coated and uncoated paper and board stocks. This low-temperature formulation provides very high gloss and is suitable for embossing and difficult-to-stamp substrates, including ribbons, 100% cotton paper, kraft, parchment, dry paper stocks and most plastics. METAL DIE FACE TEMP. RANGE: 210°F-260°F, SILICONE RUBBER DIES 275°F-450°F.
MK SERIES (Metallic)(G)(P) – Easy release, high-gloss metallic formula particularly well suited for laminates, soft-touch coatings and most rigid plastics including PP and PE. It provides easy release for fine detail through broad coverage and offers good performance on difficult inks and coatings. METAL DIE FACE TEMP. RANGE: 200°F-250°F.
MM/MMC SERIES (Matte Metallic)(G)(P) – Easy release, ultra versatile, matte formula for fine coverage (MMC) to very broad coverage (MM) on almost all paper stocks including kraft, linen, 100% cotton and more. Excellent problem solving foil for difficult substrates. METAL DIE FACE TEMP. RANGE: 210°F-260°F.
MOP SERIES (Metallic)(G)(P) – Easy release, over-printable metallic hot stamping foil designed to accept all types of printing inks. Best suited for coated and printed paper stocks. Printing ink over the metallic foil allows the printed color to take on a metallic appearance. METAL DIE FACE TEMP. RANGE: 210°F-250°F.
MPO SERIES (Metallic)(P) – Medium release for fine to medium detail on most plastics including PP and PE. High gloss, high heat resistance, great chemical resistance, excellent rub and scratch resistance. DIE FACE TEMP. RANGE: METAL DIES 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
MR SERIES (Metallic)(G)(P) – Easy release, metallic hot stamping foil for medium-fine detail through broad coverage on rough and dry paper stocks, kraft, 100% cotton paper, parchment, book cloth, ribbons, leather and mat boards. Offers ultra-high gloss, scuff resistance and heat resistance. METAL DIE FACE TEMP. RANGE: 230°F-280°F.
MS SERIES (Metallic)(G)(P) – Easy release, high-gloss metallic hot stamping foil for medium-fine detail through broad coverage on coated and dry uncoated paper and board. Suitable for embossing, edge gilding, many aqueous and UV coatings with a dyne level of 36 or higher, most rigid plastics and flexible PVC. Laser-printer resistant. METAL DIE FACE TEMP. RANGE: 210°F-260°F.
MT SERIES (Metallic)(G)(P) – Cosmetic grade metallized foil for ultra fine to large coverage on most digital varnishes and toners. Designed for use on Toner/Varnish transfer machines. High gloss, excellent rub and scratch resistance. Heavily coated with high temperature resins that co-mingle foil with varnish/toner providing a strong bond to the sheet and superior scratch and rub resistance. ROLLER FACE TEMP. RANGE: 230°F-330°F.
MUH SERIES (Metallic)(G)(P) – Very easy release metallic hot stamping foil for heavy coverage on rough papers, book cloth, ribbons, finished leather, expanded vinyl and mat boards. Best suited for lower-temperature stamping applications. Available in 110 Bright Silver and 120 Bright Gold. METAL DIE FACE TEMP. RANGE: 200°F-270°F.
MYLAR EMBOSSING FILM – Protective film available in 0.5 mil and 0.9 mil options. Used during embossing to help protect printed inks and paper surfaces from sharp die edges. Can also enhance gloss on uncoated paper stocks. DIE FACE TEMP. RANGE: 175°F-250°F.
PEX SERIES (Pigment)(P) – Exterior grade gloss pigment hot stamping foil for fine detail through broad coverage on most plastics, including polypropylene (PP) and polyethylene (PE). Offers resistance to rubbing, chemicals, water, heat and UV exposure. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PEZ SERIES (Pigment)(P) – Exterior grade matte pigment hot stamping foil for fine to medium coverage on most plastics, including polypropylene (PP) and polyethylene (PE). Offers good resistance to rubbing, chemicals, water and heat. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PG SERIES (Pigment)(G)(P) – Tight release gloss pigment formula for very fine to broad coverage on most plastics except PP and PE. Overstampable with very good abrasion resistance. Works well on most rigid plastics including ABS, PVC, PS, acrylics and polyurethanes. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PGO SERIES (Pigment)(G) – Medium release gloss pigment formula with an additional white sizing for use on most dark colored substrates. Stays bright once applied to dark substrates. Available in white (490), black (480), yellow (431), orange (433) and red (445 and 447). METAL DIE FACE TEMP. RANGE: 230°F-300°F.
PH SERIES (Pigment)(G) – Special low temperature easy release matte pigment formula for medium to heavy coverage on kraft paper, book cloths and covers, split leathers and other rough textured substrates. Non-smear and overstampable. Available in white (390), black (380), blue (325), orange (332), maroon (340) and red (385). METAL DIE FACE TEMP. RANGE: 220°F-270°F.
PI SERIES (Pigment)(P) – Exterior grade, high gloss pigment formula for virtually all plastics including PP and PE. Excellent rub, chemical, water, UV light and heat resistance. Excels at producing deep, debossed stamped images with metal dies. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PIO SERIES (Pigment)(P) – Exterior grade, high-gloss pigment formula with an additional white sizing for use on most dark colored plastics including PP and PE. Stays bright once applied to dark substrates. Excellent rub, chemical, water, UV light and heat resistance. Available in beige (415), purple (429), yellow (431), orange (433) and red (445). METAL DIE FACE TEMP. RANGE: 240°F-340°F, SILICONE RUBBER DIES 295°F-470°F.
PK (400) SERIES (Pigment)(P) – Exterior grade, gloss pigment formula for use on most plastics except PE. Excellent alcohol, rub, chemical, water, UV light and heat resistance. Available in white (490), black (480), blue (425), red (447) and green (5047). DIE FACE TEMP. RANGE: METAL DIES 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PKX SERIES (Pigment)(G)(P) – Exterior grade, easy release gloss pigment formula for fine to broad coverage on most plastics including PP and PE. Available in black (480) and white (490). METAL DIE FACE TEMP. RANGE: 220°F-280°F, SILICONE RUBBER DIES 275°F-450°F.
PM/BM SERIES (Pigment)(G)(P) – Versatile matte pigment formula for fine to medium designs on most plastics except PP and PE. Overstampable with good opacity. METAL DIE FACE TEMP. RANGE: 240°F-340°F, SILICONE RUBBER DIES 295°F-470°F.
PP SERIES (Pigment)(P) – High gloss pigment formula for fine to medium detail on virtually all plastics including PP and PE. Good chemical, rub and scratch resistance. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
PW SERIES (Pigment)(G) – Special transparent/translucent, easy release formula for enhancing underlying graphics. Medium to broad coverage on virtually all plastics except PP and PE. METAL DIE FACE TEMP. RANGE: 220°F-320°F, SILICONE RUBBER DIES 275°F-450°F.
UV100 SERIES (Clear Gloss UV-Reactive) – Easy release, clear gloss hot stamping foil designed for anti-counterfeiting and security identification. The stamped image fluoresces blue when exposed to ultraviolet light, providing a distinctive UV-reactive feature. METAL DIE FACE TEMP. RANGE: 210°F-250°F.
Not all foil colors are available in all formulations. Foil colors vary from formulation to formulation. Rev.#2 10/2026